[1]

M. Aigner, C. Heinrich, B. Jüttler, E. Pilgerstorfer, B. Simeon, and A. Vuong. Swept Volume Parameterization for Isogeometric Analysis. Mathematics of Surfaces XIII, pp. 19–44, 2009. http://link.springer.com/chapter/10.1007/978-3-642-03596-8_2

[2]

M. Ainsworth and M. Sanchez. Computing the Bézier Control Points of the Lagrangian Interpolant in Arbitrary Dimension. SIAM Journal on Scientific Computing 38, pp. 1682–1700, 2016. https://arxiv.org/pdf/1510.09197.pdf

[3]

P. Alfeld. Bivariate Spline Spaces and Minimal Determining Sets. Journal of Computational and Applied Mathematics 119, pp. 13–27, 2000. http://www.sciencedirect.com/science/article/pii/S0377042700003691

[4]

P. Alfeld and L. L. Schumaker. Smooth Macro-Elements Based on Clough-Tocher Triangle Splits. Numerische Mathematik 90, pp. 597–616, 2002. https://doi.org/10.1007/s002110100304

[5]

J. H. Argyris, I. Fried, and D. W. Scharpf. The TUBA Family of Plate Elements for the Matrix Displacement Method. The Aeronautical Journal 72, pp. 701–709, 1968.

[6]

J. L. Aurentz and L. N. Trefethen. Chopping a Chebyshev Series. ACM Transactions on Mathematical Software 43, 2017.

[7]

F. Auricchio, P. Carotenuto, and A. Reali. On the Geometrically Exact Beam Model: a Consistent, Effective and Simple Derivation from Three-Dimensional Finite-Elasticity. International Journal of Solids and Structures 45, pp. 4766–4781, 2008. http://www.sciencedirect.com/science/article/pii/S0020768308001790

[8]

G. Awanou, M. Lai, and P. Wenston. The Multivariate Spline Method for Scattered Data Fitting. 2005.

[9]

A. M. Bauer, M. Breitenberger, B. Philipp, R. Wüchner, and K. -. Bletzinger. Nonlinear Isogeometric Spatial Bernoulli Beam. Computer Methods in Applied Mechanics and Engineering 303, pp. 101–127, 2016. http://www.sciencedirect.com/science/article/pii/S0045782515004338

[10]

Y. Bazilevs, V. M. Calo, J. A. Cottrell, J. A. Evans, T. J. R. Hughes, S. Lipton, M. A. Scott, and T. W. Sederberg. Isogeometric Analysis Using T-Splines. Computer Methods in Applied Mechanics and Engineering 199, pp. 229–263, 2010. http://www.sciencedirect.com/science/article/pii/S0045782509000875

[11]

Y. Bazilevs, V. M. Calo, J. A. Cottrell, T. J. R. Hughes, A. Reali, and G. Scovazzi. Variational Multiscale Residual-Based Turbulence Modeling for Large Eddy Simulation of Incompressible Flows. Computer Methods in Applied Mechanics and Engineering 197, pp. 173–201, 2007.

[12]

T. Belytschko, W. K. Liu, and B. Moran. Nonlinear Finite Elements for Continua and Structures. 2014.

[13]

M. Berkelaar, K. Eikland, and P. Notebaert. Lp -Solve. 2004. http://lpsolve.sourceforge.net/5.5/

[14]

M. J. Borden, M. A. Scott, J. A. Evans, and T. J. R. Hughes. Isogeometric Finite Element Data Structures Based on Bézier Extraction of Nurbs. International Journal for Numerical Methods in Engineering 87, pp. 15–47, 2011. https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.2968

[15]

C. Bouby, D. Fortuné, W. Pietraszkiewicz, and C. Vallée. Direct Determination of the Rotation in the Polar Decomposition of the Deformation Gradient by Maximizing a Rayleigh Quotient. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 85, pp. 155–162, 2005. https://onlinelibrary.wiley.com/doi/abs/10.1002/zamm.200310167

[16]

E. Burman, P. Hansbo, M. G. Larson, and K. Larsson. Extension Operators for Trimmed Spline Spaces. Computer Methods in Applied Mechanics and Engineering 403, 2023.

[17]

E. M. B. Campello, P. M. Pimenta, and P. Wriggers. A Triangular Finite Shell Element Based on a Fully Nonlinear Shell Formulation. Computational Mechanics 31, pp. 505–518, 2003. https://doi.org/10.1007/s00466-003-0458-8

[18]

M. Campen and D. Zorin. Similarity Maps and Field-Guided T-Splines: a Perfect Couple. ACM Trans. Graph. 36, pp. 1–16, 2017. http://doi.acm.org/10.1145/3072959.3073647

[19]

J. Chung and G. M. Hulbert. A Time Integration Algorithm for Structural Dynamics With Improved Numerical Dissipation: the Generalized-Α Method. Journal of Applied Mechanics 60, pp. 371–375, 1993. https://appliedmechanics-asmedigitalcollection-asme-org.erl.lib.byu.edu/article.aspx?articleid=1410995

[20]

F. Cirak, M. Ortiz, and P. Schröder. Subdivision Surfaces: a new Paradigm for Thin-Shell Finite-Element Analysis. International Journal for Numerical Methods in Engineering 47, pp. 2039–2072, 2000.

[21]

E. Cohen, T. Lyche, and R. Riesenfeld. A B-Spline-Like Basis for the Powell-Sabin 12-Split Based on Simplex Splines. Mathematics of Computation 82, pp. 1667–1707, 2013. https://www.ams.org/home/page/

[22]

T. Coleman and A. Pothen. The Null Space Problem I. Complexity. SIAM Journal on Algebraic Discrete Methods 7, pp. 527–537, 1986. http://epubs.siam.org/doi/abs/10.1137/0607059

[23]

T. Coleman and A. Pothen. The Null Space Problem II. Algorithms. SIAM Journal on Algebraic Discrete Methods 8, pp. 544–563, 1987. http://epubs.siam.org/doi/abs/10.1137/0608045

[24]

C. Costa e Silva, S. F. Maassen, P. M. Pimenta, and J. Schröder. On the Simultaneous use of Simple Geometrically Exact Shear-Rigid rod and Shell Finite Elements. Computational Mechanics 67, pp. 867–881, 2021. https://doi.org/10.1007/s00466-020-01967-2

[25]

J. A. Cottrell, A. Reali, Y. Bazilevs, and T. J. R. Hughes. Isogeometric Analysis of Structural Vibrations. Computer Methods in Applied Mechanics and Engineering 195, pp. 5257–5296, 2006.

[26]

L. Demkowicz, J. T. Oden, W. Rachowicz, and O. Hardy. Toward a Universal $r \le 2$ Adaptive Finite Element Strategy, Part 1. Constrained Approximation and Data Structure. Computer Methods in Applied Mechanics and Engineering 77, pp. 79–112, 1989. http://www.sciencedirect.com/science/article/pii/0045782589901291

[27]

J. Deng, F. Chen, X. Li, C. Hu, W. Tong, Z. Yang, and Y. Feng. Polynomial Splines Over Hierarchical T-Meshes. Graphical Models 70, pp. 76–86, 2008. http://www.sciencedirect.com/science/article/pii/S1524070308000039

[28]

T. Dokken, T. Lyche, and K. F. Pettersen. Polynomial Splines Over Locally Refined Box-Partitions. Computer Aided Geometric Design 30, pp. 331–356, 2013. http://www.sciencedirect.com/science/article/pii/S0167839613000113

[29]

W. Dornisch, S. Klinkel, and B. Simeon. Isogeometric Reissner-Mindlin Shell Analysis With Exactly Calculated Director Vectors. Computer Methods in Applied Mechanics and Engineering 253, pp. 491–504, 2013. https://www.sciencedirect.com/science/article/pii/S0045782512002927

[30]

W. Dornisch. Interpolation of Rotations and Coupling of Patches in Isogeometric Reissner-Mindlin Shell Analysis. Dissertation, RWTH Aachen University, 2015.

[31]

T. Elguedj and T. J. R. Hughes. Isogeometric Analysis of Nearly Incompressible Large Strain Plasticity. Computer Methods in Applied Mechanics and Engineering 268, pp. 388–416, 2014. https://doi.org/10.1016/j.cma.2013.09.024

[32]

D. Eppstein, M. T. Goodrich, E. Kim, and R. Tamstorf. Motorcycle Graphs: Canonical Quad Mesh Partitioning. Computer Graphics Forum 27, 2008.

[33]

J. M. Escobar, J. M. Cascón, E. Rodríguez, and R. Montenegro. A new Approach to Solid Modeling With Trivariate T-Splines Based on Mesh Optimization. Computer Methods in Applied Mechanics and Engineering 200, pp. 3210–3222, 2011. http://www.sciencedirect.com/science/article/pii/S0045782511002386

[34]

J. M. Escobar, R. Montenegro, E. Rodríguez, and J. M. Cascón. The Meccano Method for Isogeometric Solid Modeling and Applications. Engineering with Computers 30, pp. 331–343, 2012. http://link.springer.com/article/10.1007/s00366-012-0300-z

[35]

R. T. Farouki. The Bernstein Polynomial Basis: a Centennial Retrospective. Computer Aided Geometric Design 29, pp. 379–419, 2012. http://www.sciencedirect.com/science/article/pii/S0167839612000192

[36]

D. D. Fox and J. C. Simo. A Drill Rotation Formulation for Geometrically Exact Shells. Computer Methods in Applied Mechanics and Engineering 98, pp. 329–343, 1992. https://www.sciencedirect.com/science/article/pii/0045782592900022

[37]

C. Garoni, C. Manni, S. Serra-Capizzano, D. Sesana, and H. Speleers. Spectral Analysis and Spectral Symbol of Matrices in Isogeometric Galerkin Methods. Mathematics of Computation 86, pp. 1343–1373, 2017. https://www.ams.org/home/page/

[38]

C. Giannelli, B. Jüttler, and H. Speleers. Thb-Splines: the Truncated Basis for Hierarchical Splines. Computer Aided Geometric Design 29, pp. 485–498, 2012. http://www.sciencedirect.com/science/article/pii/S0167839612000519

[39]

S. Goenezen, P. Barbone, and A. A. Oberai. Solution of the Nonlinear Elasticity Imaging Inverse Problem: the Incompressible Case. Computer Methods in Applied Mechanics and Engineering 200, pp. 1406–1420, 2011.

[40]

D. Groisser and J. Peters. Matched Constructions Always Yield Continuous Isogeometric Elements. Computer Aided Geometric Design 34, pp. 67–72, 2015. http://www.sciencedirect.com/science/article/pii/S0167839615000151

[41]

B. Hashemi and L. N. Trefethen. Chebfun in Three Dimensions. SIAM Journal on Scientific Computing 39, 2017.

[42]

R. R. Hiemstra, G. Sangalli, M. Tani, F. Calabrò, and T. J. R. Hughes. Fast Formation and Assembly of Finite Element Matrices With Application to Isogeometric Linear Elasticity. Computer Methods in Applied Mechanics and Engineering 355, pp. 234–260, 2019. https://linkinghub.elsevier.com/retrieve/pii/S0045782519303639

[43]

K. Hollig. Finite Element Methods With B-Splines. 2003.

[44]

X. Hu, D. Han, and M. Lai. Bivariate Splines of Various Degrees for Numerical Solution of Partial Differential Equations. SIAM Journal on Scientific Computing 29, pp. 1338–1354, 2007. http://epubs.siam.org/doi/abs/10.1137/060667207

[45]

T. J. R. Hughes. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. 2012.

[46]

T. J. R. Hughes, J. A. Cottrell, and Y. Bazilevs. Isogeometric Analysis: Cad, Finite Elements, Nurbs, Exact Geometry and Mesh Refinement. Computer Methods in Applied Mechanics and Engineering 194, pp. 4135–4195, 2005. https://www.sciencedirect.com/science/article/pii/S0045782504005171

[47]

G. M. Hulbert and J. Chung. Explicit Time Integration Algorithms for Structural Dynamics With Optimal Numerical Dissipation. Computer Methods in Applied Mechanics and Engineering 137, pp. 175–188, 1996.

[48]

A. Ibrahimbegović. On Finite Element Implementation of Geometrically Nonlinear Reissner’s Beam Theory: Three-Dimensional Curved Beam Elements. Computer Methods in Applied Mechanics and Engineering 122, pp. 11–26, 1995. http://www.sciencedirect.com/science/article/pii/004578259500724F

[49]

N. Jaxon and X. Qian. Isogeometric Analysis on Triangulations. Computer-Aided Design 46, pp. 45–57, 2014. http://www.sciencedirect.com/science/article/pii/S0010448513001577

[50]

B. Jüttler. The Dual Basis Functions for the Bernstein Polynomials. Advances in Computational Mathematics 8, pp. 345–352, 1998. https://doi.org/10.1023/A:1018912801267

[51]

M. Kapl, G. Sangalli, and T. Takacs. Construction of Analysis-Suitable $G^1$ Planar Multi-Patch Parameterizations. Computer-Aided Design 97, pp. 41–55, 2018. http://www.sciencedirect.com/science/article/pii/S0010448517302439

[52]

M. Lai and L. L. Schumaker. Spline Functions on Triangulations. 2007.

[53]

X. Li and M. A. Scott. Analysis-Suitable T-Splines: Characterization, Refineability, and Approximation. Mathematical Models and Methods in Applied Science 24, pp. 1141–1164, 2014.

[54]

X. Li and F. Chen. On the Instability in the Dimension of Splines Spaces Over T-Meshes. Computer Aided Geometric Design 28, pp. 420–426, 2011. http://www.sciencedirect.com/science/article/pii/S0167839611000896

[55]

X. Li, J. Deng, and F. Chen. Polynomial Splines Over General T-Meshes. The Visual Computer 26, pp. 277–286, 2010. https://link.springer.com/article/10.1007/s00371-009-0410-9

[56]

X. Li, J. Zheng, T. W. Sederberg, T. J. R. Hughes, and M. A. Scott. On Linear Independence of T-Spline Blending Functions. Computer Aided Geometric Design 29, pp. 63–76, 2012. http://www.sciencedirect.com/science/article/pii/S0167839611000938

[57]

L. Liu. Volumetric T-Spline Construction for Isogeometric Analysis - Feature Preservation, Weighted Basis and Arbitrary Degree. thesis, Carnegie Mellon University, 2015. https://figshare.com/articles/thesis/Volumetric_T-spline_Construction_for_Isogeometric_Analysis_Feature_Preservation_Weighted_Basis_and_Arbitrary_Degree/6724256/1

[58]

L. Liu, Y. Zhang, T. J. R. Hughes, M. A. Scott, and T. W. Sederberg. Volumetric T-Spline Construction Using Boolean Operations. Engineering with Computers 30, pp. 425–439, 2013. http://link.springer.com/article/10.1007/s00366-013-0346-6

[59]

T. Lyche and G. Muntingh. Simplex Spline Bases on the Powell-Sabin 12-Split: Part i. Oberwolfach Reports 12, pp. 1139–1200, 2015. http://arxiv.org/abs/1505.01798

[60]

T. Martin, E. Cohen, and M. Kirby. Volumetric Parameterization and Trivariate B-Spline Fitting Using Harmonic Functions. In Proc. Proceedings of the 2008 ACM Symposium on Solid and Physical Modeling, 2008. http://doi.acm.org/10.1145/1364901.1364938

[61]

K. M. Mathisen, Y. Bazilevs, B. Haugen, T. A. Helgedagsrud, T. Kvamsdal, K. M. Okstad, and S. B. Raknes. A Comparative Study of Beam Element Formulations for Nonlinear Analysis: Corotational vs Geometrically Exact Formulations. In Proc. MekIT’17-Ninth national conference on Computational Mechanics, 2017.

[62]

M. Mazure. On a General new Class of Quasi Chebyshevian Splines. Numerical Algorithms 58, pp. 399–438, 2011. https://link.springer.com/article/10.1007/s11075-011-9461-x

[63]

S. Morganti, F. Auricchio, D. J. Benson, F. I. Gambarin, S. Hartmann, T. J. R. Hughes, and A. Reali. Patient-Specific Isogeometric Structural Analysis of Aortic Valve Closure. Computer Methods in Applied Mechanics and Engineering 284, pp. 508–520, 2015. http://www.sciencedirect.com/science/article/pii/S0045782514003806

[64]

P. Morgenstern. Globally Structured 3d Analysis-Suitable T-Splines: Definition, Linear Independence and M-Graded Local Refinement. SIAM Journal on Numerical Analysis 54, pp. 2163–2186, 2016. http://arxiv.org/abs/1505.05392

[65]

M. Neamtu. Delaunay Configurations and Multivariate Splines: a Generalization of a Result of b. n. Delaunay. Transactions of the American Mathematical Society 359, pp. 2993–3004, 2007. http://www.ams.org/tran/2007-359-07/S0002-9947-07-03976-1/

[66]

T. Nguyen and J. Peters. Refinable $C^1$ Spline Elements for Irregular Quad Layout. Computer Aided Geometric Design 43, pp. 123–130, 2016. http://www.sciencedirect.com/science/article/pii/S0167839616300103

[67]

F. Pelosi, C. Giannelli, C. Manni, M. L. Sampoli, and H. Speleers. Splines Over Regular Triangulations in Numerical Simulation. Computer-Aided Design 82, pp. 100–111, 2017. http://www.sciencedirect.com/science/article/pii/S0010448516300902

[68]

J. Peters and U. Reif. Subdivision Surfaces. 2010. https://books.google.com/books?id=ndaecQAACAAJ

[69]

J. Peters. Splines and Unsorted Knot Sequences. Computer Aided Geometric Design 30, pp. 733–741, 2013. http://www.sciencedirect.com/science/article/pii/S016783961300054X

[70]

P. M. Pimenta and E. M. B. Campello. Shell Curvature as an Initial Deformation: a Geometrically Exact Finite Element Approach. International Journal for Numerical Methods in Engineering 78, pp. 1094–1112, 2009. https://onlinelibrary.wiley.com/doi/abs/10.1002/nme.2528

[71]

P. M. Pimenta and E. M. B. Campello. A Unified Approach for the Nonlinear Dynamics of Rods and Shells Using an Exact Conserving Integration Algorithm. New Trends in Thin Structures: Formulation, Optimization and Coupled Problems, pp. 99–132, 2010. https://doi.org/10.1007/978-3-7091-0231-2_4

[72]

S. P. B. P. M. Pimenta and E. M. B. Campello. A Fully Nonlinear Multi-Parameter rod Model Incorporating General Cross-Sectional In-Plane Changes and Out-Of-Plane Warping. Latin American Journal of Solids and Structures 1, pp. 119–140, 2003. https://www.lajss.org/index.php/LAJSS/article/view/29

[73]

H. Prautzsch, W. Boehm, and M. Paluszny. Bezier and B-Spline Techniques. 2002.

[74]

A. Rababah. Transformation of Chebyshev–Bernstein Polynomial Basis. Computational Methods in Applied Mathematics 3, 2003.

[75]

J. N. Reddy. An Introduction to Nonlinear Finite Element Analysis Second Edition: With Applications to Heat Transfer, Fluid Mechanics, and Solid Mechanics. 2014.

[76]

U. Reif. A Refineable Space of Smooth Spline Surfaces of Arbitrary Topological Genus. Journal of Approximation Theory 90, pp. 174–199, 1997. http://www.sciencedirect.com/science/article/pii/S0021904596930798

[77]

E. Reissner. On One-Dimensional Finite-Strain Beam Theory: the Plane Problem. Zeitschrift für angewandte Mathematik und Physik ZAMP 23, pp. 795–804, 1972. https://doi.org/10.1007/BF01602645

[78]

E. Reissner. On One-Dimensional Large-Displacement Finite-Strain Beam Theory. Studies in Applied Mathematics 52, pp. 87–95, 1973. https://onlinelibrary.wiley.com/doi/abs/10.1002/sapm197352287

[79]

E. Reissner. On Finite Deformations of Space-Curved Beams. Zeitschrift für angewandte Mathematik und Physik ZAMP 32, pp. 734–744, 1981. https://doi.org/10.1007/BF00946983

[80]

S. Rossi, N. Abboud, and G. Scovazzi. Implicit Finite Incompressible Elastodynamics With Linear Finite Elements: a Stabilized Method in Rate Form. Computer Methods in Applied Mechanics and Engineering 311, pp. 208–249, 2016.

[81]

D. Schillinger, J. A. Evans, A. Reali, M. A. Scott, and T. J. Hughes. Isogeometric Collocation: Cost Comparison With Galerkin Methods and Extension to Adaptive Hierarchical Nurbs Discretizations. Computer Methods in Applied Mechanics and Engineering 267, 2013.

[82]

L. Schumaker. Spline Functions: Basic Theory. 2007.

[83]

L. L. Schumaker and L. Wang. Spline Spaces on Tr-Meshes With Hanging Vertices. Numerische Mathematik 118, pp. 531–548, 2011. https://doi.org/10.1007/s00211-010-0353-0

[84]

M. A. Scott, M. J. Borden, C. V. Verhoosel, T. W. Sederberg, and T. J. R. Hughes. Isogeometric Finite Element Data Structures Based on Bézier Extraction of T-Splines. International Journal for Numerical Methods in Engineering 88, pp. 126–156, 2011. http://onlinelibrary.wiley.com/doi/10.1002/nme.3167/abstract

[85]

M. A. Scott, X. Li, T. W. Sederberg, and T. J. R. Hughes. Local Refinement of Analysis-Suitable T-Splines. Computer Methods in Applied Mechanics and Engineering 213-216, pp. 206–222, 2012. http://www.sciencedirect.com/science/article/pii/S0045782511003689

[86]

M. A. Scott, D. C. Thomas, and E. J. Evans. Isogeometric Spline Forests. Computer Methods in Applied Mechanics and Engineering 269, pp. 222–264, 2014. http://www.sciencedirect.com/science/article/pii/S0045782513002764

[87]

G. Scovazzi, B. Carnes, X. Zeng, and S. Rossi. A Simple, Stable, and Accurate Linear Tetrahedral Finite Element for Transient, Nearly, and Fully Incompressible Solid Dynamics: a Dynamic Variational Multiscale Approach. International Journal for Numerical Methods in Engineering 106, pp. 799–839, 2016.

[88]

T. Sederberg, J. Zheng, A. Bakenov, and A. Nasri. T-Splines and T-Nurccs. ACM Transactions on Graphics 22, pp. 477–484, 2003.

[89]

T. W. Sederberg, J. Zheng, and X. Song. Knot Intervals and Multi-Degree Splines. Computer Aided Geometric Design 20, pp. 455–468, 2003. http://www.sciencedirect.com/science/article/pii/S0167839603000967

[90]

W. Shen and G. Wang. A Basis of Multi-Degree Splines. Computer Aided Geometric Design 27, pp. 23–35, 2010. http://www.sciencedirect.com/science/article/pii/S0167839609000946

[91]

A. V. Shutov, R. Landgraf, and J. Ihlemann. An Explicit Solution for Implicit Time Stepping in Multiplicative Finite Strain Viscoelasticity. Computer Methods in Applied Mechanics and Engineering 265, pp. 213–225, 2013.

[92]

J. C. Simo. A Finite Strain Beam Formulation. the Three-Dimensional Dynamic Problem. Part i. Computer Methods in Applied Mechanics and Engineering 49, pp. 55–70, 1985. http://www.sciencedirect.com/science/article/pii/0045782585900507

[93]

J. C. Simo and D. D. Fox. On a Stress Resultant Geometrically Exact Shell Model. Part i: Formulation and Optimal Parametrization. Computer Methods in Applied Mechanics and Engineering 72, pp. 267–304, 1989. https://www.sciencedirect.com/science/article/pii/0045782589900029

[94]

J. C. Simo, D. D. Fox, and T. J. R. Hughes. Formulations of Finite Elasticity With Independent Rotations. Computer Methods in Applied Mechanics and Engineering 95, pp. 277–288, 1992. https://www.sciencedirect.com/science/article/pii/0045782592901449

[95]

J. C. Simo, D. D. Fox, and M. S. Rifai. On a Stress Resultant Geometrically Exact Shell Model. Part ii: the Linear Theory; Computational Aspects. Computer Methods in Applied Mechanics and Engineering 73, pp. 53–92, 1989. https://www.sciencedirect.com/science/article/pii/0045782589900984

[96]

J. C. Simo, D. D. Fox, and M. S. Rifai. On a Stress Resultant Geometrically Exact Shell Model. Part Iii: Computational Aspects of the Nonlinear Theory. Computer Methods in Applied Mechanics and Engineering 79, pp. 21–70, 1990. https://www.sciencedirect.com/science/article/pii/0045782590900943

[97]

J. C. Simo, M. S. Rifai, and D. D. Fox. On a Stress Resultant Geometrically Exact Shell Model. Part iv: Variable Thickness Shells With Through-The-Thickness Stretching. Computer Methods in Applied Mechanics and Engineering 81, pp. 91–126, 1990. https://www.sciencedirect.com/science/article/pii/004578259090143A

[98]

J. C. Simo and L. Vu-Quoc. A Three-Dimensional Finite-Strain rod Model. Part ii: Computational Aspects. Computer Methods in Applied Mechanics and Engineering 58, pp. 79–116, 1986. https://www.sciencedirect.com/science/article/pii/0045782586900794

[99]

J. C. Simo. A Framework for Finite Strain Elastoplasticity Based on Maximum Plastic Dissipation and the Multiplicative Decomposition. Part ii: Computational Aspects. Computer Methods in Applied Mechanics and Engineering 68, pp. 1–31, 1988.

[100]

J. C. Simo. A Framework for Finite Strain Elastoplasticity Based on Maximum Plastic Dissipation and the Multiplicative Decomposition: Part i. Continuum Formulation. Computer Methods in Applied Mechanics and Engineering 66, pp. 199–219, 1988.

[101]

J. C. Simo and T. J. R. Hughes. Computational Inelasticity. 2006.

[102]

H. Speleers. Construction of Normalized B-Splines for a Family of Smooth Spline Spaces Over Powell-Sabin Triangulations. Constructive Approximation 37, pp. 41–72, 2012. http://link.springer.com/article/10.1007/s00365-011-9151-x

[103]

H. Speleers. Algorithm 999: Computation of Multi-Degree B-Splines. ACM Transactions on Mathematical Software 45, pp. 1–15, 2019. https://doi.org/10.1145/3321514

[104]

H. Speleers, C. Manni, and F. Pelosi. From Nurbs to Nurps Geometries. Computer Methods in Applied Mechanics and Engineering 255, pp. 238–254, 2013.

[105]

I. H. Stangeby. Simplex Splines on the Powell-Sabin 12-Split. Dissertation, University of Oslo, 2018. https://www.duo.uio.no/handle/10852/64070

[106]

G. Strang. Piecewise Polynomials and the Finite Element Method. Bulletin of the American Mathematical Society 79, pp. 1128–1137, 1973. https://www.ams.org/home/page/

[107]

D. C. Thomas, M. A. Scott, J. A. Evans, K. Tew, and E. J. Evans. Bézier Projection: a Unified Approach for Local Projection and Quadrature-Free Refinement and Coarsening of Nurbs and T-Splines With Particular Application to Isogeometric Design and Analysis. Computer Methods in Applied Mechanics and Engineering 284, pp. 55–105, 2015. http://www.sciencedirect.com/science/article/pii/S0045782514002448

[108]

D. Toshniwal, H. Speleers, R. R. Hiemstra, and T. J. R. Hughes. Multi-Degree Smooth Polar Splines: a Framework for Geometric Modeling and Isogeometric Analysis. Computer Methods in Applied Mechanics and Engineering 316, pp. 1005–1061, 2017. http://www.sciencedirect.com/science/article/pii/S004578251631533X

[109]

D. Toshniwal, H. Speleers, R. R. Hiemstra, C. Manni, and T. J. R. Hughes. Multi-Degree B-Splines: Algorithmic Computation and Properties. Computer Aided Geometric Design 76, pp. 101792–0, 2020. https://www.sciencedirect.com/science/article/pii/S0167839619301013

[110]

D. Toshniwal, H. Speleers, and T. J. R. Hughes. Smooth Cubic Spline Spaces on Unstructured Quadrilateral Meshes With Particular Emphasis on Extraordinary Points: Geometric Design and Isogeometric Analysis Considerations. Computer Methods in Applied Mechanics and Engineering 327, pp. 411–458, 2017. http://www.sciencedirect.com/science/article/pii/S0045782517305303

[111]

L. N. Trefethen. Approximation Theory and Approximation Practice. 2013.

[112]

W. Wang, Y. Zhang, L. Liu, and T. J. R. Hughes. Trivariate Solid T-Spline Construction from Boundary Triangulations With Arbitrary Genus Topology. Computer-Aided Design 45, pp. 351–360, 2013. http://www.sciencedirect.com/science/article/pii/S0010448512002230

[113]

X. Wang and X. Qian. An Optimization Approach for Constructing Trivariate B-Spline Solids. Computer-Aided Design 46, pp. 179–191, 2014. http://www.sciencedirect.com/science/article/pii/S001044851300170X

[114]

S. Xia and X. Qian. Isogeometric Analysis With Bézier Tetrahedra. Computer Methods in Applied Mechanics and Engineering 316, pp. 782–816, 2017.

[115]

S. Xia, X. Wang, and X. Qian. Continuity and Convergence in Rational Triangular Bézier Spline Based Isogeometric Analysis. Computer Methods in Applied Mechanics and Engineering 297, pp. 292–324, 2015. http://www.sciencedirect.com/science/article/pii/S0045782515002777

[116]

G. Xu, B. Mourrain, R. Duvigneau, and A. Galligo. Parameterization of Computational Domain in Isogeometric Analysis: Methods and Comparison. Computer Methods in Applied Mechanics and Engineering 200, pp. 2021–2031, 2011. http://www.sciencedirect.com/science/article/pii/S0045782511001101

[117]

G. Xu, B. Mourrain, R. Duvigneau, and A. Galligo. Analysis-Suitable Volume Parameterization of Multi-Block Computational Domain in Isogeometric Applications. Computer-Aided Design 45, pp. 395–404, 2013. http://www.sciencedirect.com/science/article/pii/S0010448512002278

[118]

Y. Zhang, W. Wang, and T. J. R. Hughes. Solid T-Spline Construction from Boundary Representations for Genus-Zero Geometry. Computer Methods in Applied Mechanics and Engineering 249, pp. 185–197, 2012. http://www.sciencedirect.com/science/article/pii/S0045782512000254

[119]

Z. Zou, T. J. R. Hughes, M. Scott, R. Sauer, and E. Savitha. Galerkin Formulations of Isogeometric Shell Analysis: Alleviating Locking With Greville Quadratures and Higher-Order Elements. Computer Methods in Applied Mechanics and Engineering 380, pp. 113757–0, 2021. https://linkinghub.elsevier.com/retrieve/pii/S0045782521000931